Roof Waterproofing and Roof Leak Repair in Dubai

This is our limited regional launch phase where selected villas and commercial roofs receive pilot installation pricing and documented system implementation.

We select a limited number of projects each month. Availability depends on schedule and roof condition.

The silicone protection system is American-engineered and developed for high-performance heat and UV resistance. Regional installation follows UAE project standards.

Our industrial-grade silicone coating system is specifically rated for continuous ponding water exposure on warehouse roofs. Unlike traditional bitumen membranes that deteriorate under prolonged water contact, silicone maintains its structural integrity and waterproofing performance even when submerged for weeks. For warehouse roofs in Jebel Ali, Dubai South, and DIP with poor drainage or low-slope areas, we apply the coating at increased thickness (30-40 mils) in ponding zones to create a permanent barrier. The flexible silicone membrane moves with thermal expansion and contraction, preventing the cracks that cause leaks in rigid systems. This eliminates the cycle of emergency repairs, inventory relocation, and operational downtime that warehouse operators face with failing traditional waterproofing.

Minimal to zero downtime for most industrial facilities. Our coating system is applied directly over existing roof surfaces without tear-off, and work is performed from the roof level — not inside your warehouse or facility. For 24/7 operations like logistics centers, we can schedule application during off-peak hours or weekends. The coating cures quickly: foot traffic is possible within 2-4 hours, and full waterproofing performance is achieved within 24 hours. Compare this to traditional membrane replacement which requires roof shutdown, material removal, debris management, and multi-day installation. For warehouse and industrial clients, the reduced downtime alone often justifies the investment — protecting revenue continuity, maintaining delivery schedules, and eliminating costly inventory relocation expenses.

Yes, absolutely. Our application process is designed specifically for active industrial facilities that cannot afford operational shutdowns. All work is conducted on the roof exterior with no interior access required, meaning your warehouse staff, forklifts, inventory movement, and shipping operations continue uninterrupted below. The silicone coating system has minimal odor and is applied in sections, allowing us to work around rooftop HVAC equipment, skylights, and access points while maintaining safety zones. For facilities in Jebel Ali, Dubai South, and DIP operating 24/7 logistics schedules, we coordinate application timing with your operational needs — often working during night shifts or weekends when rooftop activity is minimal. Unlike torch-applied membranes or hot asphalt systems that create safety concerns and require facility evacuation, our cold-applied system poses no fire risk and produces no hazardous fumes entering ventilation systems.

We use a comprehensive approach: first, we conduct a detailed inspection to identify all leak sources — including hidden ones. Then, we prepare the surface by cleaning, repairing cracks, and applying primer. Finally, we apply a seamless, flexible waterproofing membrane that bonds directly to your existing roof. This creates a monolithic barrier that eliminates all penetration points. Unlike patch repairs, our system addresses the entire roof surface to prevent future leaks.

Our advanced coating system is specifically formulated for extreme climates and has been tested to withstand continuous temperatures exceeding 50°C. The UV-stable formulation resists degradation from intense Gulf sunlight. With proper application at the correct thickness, the system typically lasts 15-20+ years. We offer warranties starting from 10 years, with extended warranty options available for projects meeting specific thickness and maintenance requirements.

Yes, one of the key advantages of our system is the ability to apply directly over existing bitumen and modified bitumen membranes. There's no need for costly and disruptive tear-off. We prepare the existing surface by cleaning, removing loose materials, and applying a compatible primer. The coating then bonds to the bitumen, creating a new protective layer. This approach is faster, more cost-effective, and eliminates landfill waste from roof removal.

Absolutely. Ponding water is common on large flat roofs and is often where leaks begin. Our waterproofing system is rated for permanent water immersion and will not degrade in standing water. For areas with chronic ponding, we apply additional coating thickness and reinforcement to ensure maximum durability. We also assess drainage options — though often the best solution is simply protecting the existing low points with our ponding-resistant system.

Coating thickness is critical for long-term performance. We measure wet film thickness during application using gauges, and verify dry film thickness (DFT) after curing with calibrated magnetic or ultrasonic meters. Our standard specification is 20-30 mils (0.5-0.75mm) dry film thickness on flat areas, with increased thickness on details, flashings, and ponding areas. All measurements are documented and provided in the project completion report.

We typically schedule inspections within 24-48 hours of your request, depending on location within the UAE. The inspection itself takes 1-3 hours for most commercial roofs (under 5,000 sqm). For larger facilities, we may need additional time. After inspection, you'll receive a detailed report and estimate within 2-3 business days, including photos, identified issues, and recommended solutions with pricing.

We offer tiered warranty options based on system specification and project requirements. Our standard warranty is 10 years covering material and workmanship defects. Extended warranties of 15 and 20 years are available for projects meeting enhanced thickness specifications. All warranties are backed by the manufacturer and our installation guarantee. We also offer optional maintenance programs that can extend effective coverage even further.

Yes, significantly. Our white reflective coating achieves a Solar Reflectance Index (SRI) of 100+, reflecting up to 85% of solar radiation. This typically reduces roof surface temperature by 15-25°C compared to dark bitumen roofs. The result is measurably lower heat transfer into the building, reduced cooling load, and meaningful energy savings. Many clients report HVAC cost reductions of 10-20% after coating, particularly in buildings with poor insulation.

The terms are often used interchangeably, but there's an important distinction. A "roof coating" typically refers to a thin protective layer (5-10 mils) that extends roof life and provides UV protection but has limited waterproofing capability. A true "roof waterproofing membrane" like our system is applied at 20-30+ mils and creates a seamless, flexible barrier capable of bridging cracks and providing permanent water protection. We apply waterproofing membranes — not thin maintenance coatings.

Cost varies based on roof size, condition, access, and warranty requirements. For industrial projects in UAE, prices typically range from AED 30-80 per square meter depending on these factors. Larger roofs (5,000+ sqm) benefit from economies of scale. Our calculator provides instant estimates, or contact us for a detailed quote after inspection. When comparing costs, consider that our system eliminates tear-off expense and provides 15-20+ year service life — often making it the most economical long-term choice.