Limited Luxury Villas Selected • Pilot Pricing • Eligibility Required
American-engineered silicone-based cool roof coating that reflects up to 85% of solar radiation, reducing roof surface temperature by 15-25°C. Designed specifically for UAE and Gulf climate conditions.
100% silicone-based cool roof coating following American ASTM specifications for maximum durability in extreme heat.
In Dubai and the UAE, roof surface temperatures regularly exceed 70-80°C during summer months. This extreme heat transfers directly into the building, creating significant cooling challenges.
Dark bitumen and asphalt roofs absorb up to 90% of solar radiation, reaching surface temperatures of 70-80°C in summer — significantly increasing heat transfer into the building.
Excessive roof heat forces HVAC systems to work harder and longer. In warehouses and industrial facilities, cooling costs represent 40-60% of total electricity consumption.
Daily temperature swings of 30-40°C cause constant expansion and contraction of the roof membrane, accelerating cracking, seam failure, and premature aging.
Hot spots and inconsistent indoor temperatures reduce worker productivity and comfort, particularly in spaces directly below the roof or with limited insulation.
Rooftop equipment (HVAC units, cables, pipes) experience accelerated degradation when exposed to extreme surface temperatures. Maintenance cycles shorten significantly.
High energy consumption for cooling increases carbon footprint. Cool roofs contribute to urban heat island reduction and support sustainability goals.
Summer surface temperature
Summer surface temperature
Our American-engineered 100% silicone roof coating combines superior heat reflectivity with permanent waterproofing protection. One application addresses both heat transfer and leak prevention for 15-20+ years.
White reflective surface achieves 85%+ solar reflectance and Solar Reflectance Index (SRI) of 100+, meeting and exceeding CRRC cool roof standards.
Silicone's molecular structure is inherently UV-stable. Unlike acrylic coatings that chalk and degrade, silicone maintains reflectivity and color for decades.
Cool roof coating provides complete waterproofing protection. Rated for permanent ponding water immersion — the only coating chemistry with this capability.
300%+ elongation allows the coating to expand and contract with daily temperature cycles without cracking, even after years of thermal stress.
Spray or roller-applied system forms a monolithic membrane with no seams, laps, or joints — eliminating the primary failure points of traditional roofing.
Applies directly over existing bitumen, metal, concrete, or membrane roofs. No costly removal of old materials — saving 30-50% compared to replacement.
Cool roof coating delivers maximum value for buildings with large flat roof areas, limited insulation, or high cooling requirements.
Large flat roof areas with minimal insulation benefit significantly from heat reflection. Reduces internal temperature and cooling costs.
Metal deck roofs in industrial facilities absorb extreme heat. Cool roof coating improves worker comfort and reduces equipment cooling requirements.
Large retail footprints with extensive HVAC requirements. Cool roof coating reduces peak cooling demand and improves occupant comfort.
Refrigerated warehouses and cold chain facilities benefit from reduced heat gain, lowering compressor load and energy consumption.
Mission-critical cooling requirements make any heat reduction valuable. Cool roof coating supplements existing thermal management systems.
Office buildings, hotels, and mixed-use developments. Supports sustainability initiatives and reduces operational costs.
Our engineering-led installation process ensures optimal coating thickness and adhesion for maximum heat reflectivity and long-term performance.
Evaluate current roof temperature, substrate condition, and heat transfer patterns. Identify priority areas and calculate expected improvement.
Specify primer, coating thickness (DFT), and reinforcement requirements based on substrate type, condition, and warranty requirements.
Clean roof surface, repair defects, seal penetrations, and apply appropriate primer for optimal adhesion.
Apply silicone cool roof coating in multiple coats to achieve specified DFT. Reinforcement fabric at details and high-stress areas.
Most cool roof coating projects complete within 1-2 weeks depending on roof size and complexity. Work can proceed while building is occupied with zero disruption to operations below.
Request AssessmentWarranty duration is determined by system build-up thickness (DFT) and substrate condition. All warranties cover material failure, workmanship defects, and reflectivity performance.
Our cool roof system specification follows American ASTM C1115 guidelines for silicone roof coatings. This engineering-led approach ensures predictable, long-term performance in UAE's extreme conditions.
Common questions about cool roof coating and heat reduction solutions in Dubai and UAE.
Have more questions? Our technical team is ready to help.
Not sure if cool roof coating is right for your building? Our technical expert can assess current roof temperature, calculate expected improvement, and provide ROI estimates — with no obligation.
Surface temperature measurement, substrate condition evaluation, heat transfer analysis, and expected energy savings calculation.
No obligation. Technical evaluation only.
We'll contact you within 24 hours.
Please try again or email [email protected]